Equipment List

(Updated: 6/16)

CNC Mills
MFG/Model Size/Capabilities and Controls Quantity
Mori Seiki DMU 80 High speed 5 axis machining center 120 position tool changer, probing and auto set (1)
Mori Seiki NH4000 High Speed Horizontal Machining Center - with twin pallets and a 120 position tool changer and a Fanuc controller @ 4 axis, and tool pre-setters. (1)
Mori Seiki MH40 Horizontal Machining Center - with twin pallets and a 40 position tool changer, and a Fanuc controller @4 axis. (1)
Mori Seiki MV65 Vertical Machine Center - 60" x 25.6" x 25.6" travel, 30 position changer @.0002 accuracy and Fanuc controller. (1)
YCM 108-B High Speed Vertical Machining Center @ 44.09" x 30" x 27.56" travel with a 24 position tool changer and <.0002 position accuracy with a Fanuc controller,
Dex-Locks quick change fixturing and tool pre-setters.
(1)
SuperMax XV 106 High Speed Vertical Machining Center @ 40.16" x 23.62" x 23.62", and Dex-Locs quick change fixturing, and tool pre-setters. (1)
YCM XV1020-A High Speed Vertical Machining Center @ 40" x 20" x 21.30" traverl with a 24 position tool changer and with a Renishaw Probing System,
Dex-Locs quick change tooling, and tool pre-setters.
(10)
SuperMax FV56A High Speed Vertical Machining Center @ 22.04" x 16.14" x 17.71" travel with a 24 position tool changer, and Fanuc controller. (1)
SuperMax 1-R Rebel Vertical Machine Center @ 15" x 25" x 15" travel, 20 position tool changer, Fanuc controller and (1) with extended Z-axis and 4th axis capability (2)
CNC Lathes
MFG/Model Size/Capabilities and Controls Quantity
Daewoo 220 Lynx Turning Center- 8" Chuck, tool setter, Fanuc controller, mated with a MTA V-65 Bar Feeder. (1)
Daewoo 210 Lynx Turning Center- 6", tool setter and Fanuc controller. (1)
Daewoo 300 Lynx Turning Center- 10", tool setter and Fanuc controller. (1)
Daewoo 240 Puma Turning Center- 8", tool setter and Fanuc controller. (1)
Mori Seiki Turning Center- 10" with Fanuc controller and twin turrets. (1)
SuperMax TC26 Turning Center- 10" with Fanuc controller and tool setters. (1)
CNC Wire EDMs
MFG/Model Size/Capabilities and Controls Quantity
Sodick 15.50" x 23.50" x 10.50x axis travel with a 2 ton/4000 pound capacity table. (2)
Charmilles Robofill 300 22" x 14" x 15.75", machine is capable of 30 degrees taper over 15.75" in height. (1)
Charmilles Robofill 440 22" x 14" x 15.75", machine is capable of 30 degrees taper over 15.75" in height. (1)
Sinker EDMs
MFG/Model Size/Capabilities and Controls Quantity
Sodick AQ55 CNC Sinker Mark 30 Control, 15" x 23" 15" travel capacity with LP1 controller. (1)
Sodick A30 CNC Sinker Mark 21 Control, 11.8" x 9.8" x 9.8" travel capacity. (1)
Sodick K1C High speed fast-hole EDM driller. (1)
TQ PRO1 6 axis high speed hole drilling EDM with controller. Note: TQ Design - Patent Pending. (1)

Inspection Lab & Misc. Equipment

-Brown &Sharp ADVANTAGE CMM Machine with PC Dmis CAD Plus ++, and Environmentally Controlled.

-SuperMax Manual Knee Milling Machines

-Bridgeport Knee Mills

-Tool Room Lathes

-3 Ton (6000 lb) Lifting Capability

Copyright© 2016 T/Q Systems Inc. All rights reserved.